Lead Seal
The Round Lead Seals is designed with two parallel holes and a knot chamber. During fitting the wire or string is
threaded through the two parallel holes of the lead sealsand crossed inside the knot chamber before closing with the
sealing tool to prevent slippage.
The LS31F Seal Cross-hole Lead Seals is designed so that the lashed wire is crimped together when the seal is compressed with the sealing tool. The effect of crimping the lashed wire together
alleviates any chance of twisting the wire out of the hole without leaving clear evidence of tampering.
To optimize security the sealing tool dies can be engraved to emboss or deboss characters /numbers/logo onto the
lead seals, giving reference to the application user.
Recommended applications
Gas, Water & Electric meters, Drums, Valves, Refineries, Post Bags, Cages, Lockers
Material
99.9% Pure Lead
Marking
Plain or Company name/logo embossed or debossed using sealing tool with engraved dies.
Sealing Tool
LS29F & LS41F – YPL 9062 supplied with plain 10mm dies as standard
LS4F – YPL 9083 supplied with plain 12mm dies as standard
| Ref | Sizes in mm | LS 4F | LS 29F | LS 41F |
|---|---|---|---|---|
| A | Diameter | 12.5 | 9.0 | 10.0 |
| B | Thickness | 5.5 | 4.5 | 4.0 |
| C | Hole diameter | 3.2 | 2.4 | 2.5 |
| D | Hole width | 3.2 | 2.3 | 2.2 |
| E | Chamber width | 9.0 | 6.3 | 7.0 |
| Ref | Sizes in mm | LS 31F |
|---|---|---|
| A | Diameter | 11 |
| B | Thickness | 5.8 |
| C | Hole size | 1.8 |
